FIGURE 2-8
FIGURE 2-6Cluster Control Panel Window
2.In the Cluster Control Panel window, double-click the Cluster Console (console mode) icon to display a Cluster Console window for each cluster node (see
FIGURE 2-7).
Note –Before you use an editor in a Cluster Console window, verify that the TERM
shell environment value is set and exported to a value of vt220.shows the terminal emulation in the Cluster Console window.
To issue a Stop-Acommand to the cluster nodes and to access the OpenBoot™ PROM (OBP) prompt, position the cursor in the Cluster Console window, and enter the <ctrl>] character sequence. This character forces access to the telnet prompt. Enter the Stop-Acommand, as follows:
telnet> send brk ok>
Chapter 2 The Cluster Platform 4500/3 System 39
