| Sun Microsystems 4500/3

CODE EXAMPLE B-2Solstice DiskSuite Configuration

Setting the node ID for "sc3sconf1-n1" ... done (id=1)

Checking for global devices global file system ... done Checking device to use for global devices file system ... done Updating vfstab ... done

Verifying that NTP is configured ... done Installing a default NTP configuration ... done

Please complete the NTP configuration after scinstall has finished.

Verifying that "cluster" is set for "hosts" in nsswitch.conf ...

done

Adding the "cluster" switch to "hosts" in nsswitch.conf ... done

Verifying that "cluster" is set for "netmasks" in nsswitch.conf

... done

Adding the "cluster" switch to "netmasks" in nsswitch.conf ...

done

Verifying that power management is NOT configured ... done

Ensure network routing is disabled ... done

Please re-boot this machine.

Log file - /var/cluster/logs/install/scinstall.log.642

Checking installed patches...

Verifying sufficient filesystem capacity (dry run method)...

Installing patch packages...

Patch number 110648-02 has been successfully installed. See /var/sadm/patch/110648-02/log for details

Patch packages installed:

SUNWscdev

SUNWscr

SUNWscu

Updating the /etc/inet/ntp.conf file....

============================================================

System will reboot now!

============================================================

syncing file systems... done