Sun Microsystems 4500/3 Add the router name and IP address, Add the cluster environment name

Note –Use TABLE 2-1on page 8 as a reference to input data for Step 29 through Step 36. The variables shown in Step 29 through Step 32 are sample node names and parameters.

29. Add the router name and IP address:

Enter the Management Server’s Default Router (Gateway) IP

Address... 192.145.23.248

30. Add the cluster environment name:

Enter the Cluster Environment Name (node names will follow)...

sc3sconf1

31. Enter the terminal concentrator name (node names will follow):

Enter the Terminal Concentrator Name...sc3conf1-tc

Enter the Terminal Concentrator’s IP Address...192.145.23.90

32. Add the cluster node names and IP addresses:

Enter the First Cluster Node’s Name...	sc3sconf1-n1
Enter the First Cluster Node’s IP Address...		192.145.23.91
Enter the First Cluster Node’s Ethernet Address...			9:8:50:bf:c5:91
Enter the Second Cluster Node’s Name...	sc3sconf1-n2
Enter the Second Cluster Node’s IP Address...		192.145.23.92
Enter the Second Cluster Node’s Ethernet Address...			8:9:10:cd:ef:b3

Your network administrator can provide the remaining parameters for your environment.

33. Add the disk array host names and IP addresses.:

Enter the First T3’s Name...	t3-data
Enter the First T3’s IP Address...		192.145.23.93
Enter the First T3’s Ethernet Address...			00:12:e2:00:4c:4b
Enter the Second T3’s Name...	t3-mirror
Enter the Second T3’s IP Address...		192.145.23.94
Enter the Second T3’s Ethernet Address...			00:10:f2:00:3e:4f

Chapter 2 The Cluster Platform 4500/3 System 35