Sun Microsystems 4500/3 manual Completing the Recovery Process, Install the second data CD

7.Install the second data CD.

When all files are copied from the first data CD, you are prompted to remove CD 1 and mount CD 2 on the CD-ROM drive. After CD 2 is mounted, press the Return key. The software and patch files are copied from CD 2 onto the management server boot disk. When all files are copied from both CDs, the system automatically shuts down. You must reboot the system. This process takes approximately 20 minutes.

Please place Recovery CD #2 in the CD-ROM drive. Press <Return> when mounted.

<CR>

Restoring files from CD 2....

Management Server restore complete; now shutting down system. INIT: New run level: 0

The system is coming down. Please wait. System services are now being stopped. umount: /dev busy

The system is down.

syncing file systems... done Program terminated

Completing the Recovery Process

Once the management server recovery software is loaded, you must configure the system to match your environment. Refer to “Customizing the Cluster Platform 4500/3” on page 18 to customize your cluster environment. If the recovery process involves the replacement of cluster nodes, refer to “Ethernet IP Address Worksheet” on page 8 to verify that the first cluster node’s FC-AL is properly set up.

46 Cluster Platform 4500/3 User’s Guide • July 2001