PLAYBACK...continued
SEARCH BY TIME
1. Select the play button to call up the playback Menu | or press PLAY |
on the front of the DVR or the remote. |
|
2.Highlight PLAY TIME SEARCH and select using the mouse or by pressing enter on the DVR or remote.
3.Use the mouse wheel or directional keys to choose the date and time you wish to view.
4.The total time you have been recording for is listed at the bottom of the play time search. START TIME is when your DVR began recording and END TIME is the last time your DVR was recording.
5.After you have chosen the date and time you want to view, select the 
to view the footage or press enter on DVR or remote control.
6.Please see above for playback controls.
7.To exit playback, press the stop button, either on the DVR or remote control, or from the bottom Pop Up Menu if using the mouse.
EVENT LIST SEARCH
1. Select the play button to call up the playback Menu | or press PLAY on the |
front of DVR or remote control. |
|
2.Highlight EVENT LIST SEARCH.
3.Press ENTER or double click the left mouse button to enter the Event Search menu or press the enter button on the DVR or remote control.
4.Navigate through the event list by using the up and down directional buttons or the mouse scroll wheel.
5.Highlight the event you want to view and press enter or double click the left mouse button to view the video footage from the event.
6.Follow the playback controls listed earlier to view your footage.
7.To exit playback, press STOP or scroll mouse to bottom of screen and click the stop button.
The Events are as follows:
POWER | If the DVR experiences power loss, it will record the date and time of the rebooting. | |
|
| |
RECORD | When the recording starts, the DVR will record the date, time and corresponding channel, as well as the icon will appear | |
| on the channel. | |
|
| |
V. LOSS | When the signal from a camera is lost, the DVR will record the date, time and corresponding channel, as well as the icon | |
| will appear on the channel. This could be caused by a bad connection or tampering with the camera. | |
|
| |
ALARM | When an external alarm is triggered, the DVR will record the date, time and corresponding channel. The DVR will also display | |
| the | icon on the channel which received the alarm until a button is pressed. |
|
| |
MOTION | When the DVR detects motion, it will record the date, time, and corresponding channel. The DVR will also display the | |
|
| icon on the channel where motion was detected. |
|
|
|
CV501 - 16CH | 45 |
|
|
