MOBILE VIEWING INSTALLATION GUIDE...continued

The following will be displayed:

Name: This is arbitrary and can be named to your liking.

Host: This is the IP address for your DVR. If connecting using the 3G or other wireless network the proper ports must be forwarded on your router. See Port Forwarding for instructions. Ex. Host: 74.11.213.177.

Port: This is the http port used by the DVR. By default the port is 80.

User: The user account used to access the DVR. By default the user is “admin.”

Password: The password associated with the user entered in the line above. By default the password for the “admin” account is “admin.”

Image Size: QCIF (176 x 144 pixels).

Channel: The Input Channel you wish to view (1-4).

Fit to Screen: Will expand the image to fit the screen. Can be set to Yes or No.

Click OK to save. Or click Options > OK > You will return to the site list.

6.Highlight the desired site you wish to connect to.

Click Options

Click Select

You will return to the live viewer and the screen should display: "Current -Site: 1NAME, Disconnected"

Click Options

Click on Connect

You should be prompted that the mobile device is trying to make a connection to the

IP address of the DVR.

• Click Ok or Allow to allow the connection.

Note: If all of your settings are correct you will view the channel of the DVR that you set in the Site List Settings.

CV501 - 16CH

69

 

 

Page 69
Image 69
SVAT Electronics CV501 - 16CH instruction manual Click Options Click on Connect