20
< You can also select FM or AM by pressing the TUNER button on
the remote control unit once or twice.
< You can also select iPod o r USB by pressing the iPod/USB button
on the remote control unit once or twice.
< To listen to an external source con nected to the AUX IN jack,
select AUX1 or AUX2.
< You can also selec t AUX1 or AUX2 by pressing the AUX button
on the remote control unit once or twice.
3 Play the source, and adjust the volume using the VOLUME
knob.
The volume is adjustable from MIN to MAX. You can hold down
the VOLUME – or + buttons on the remote control unit to reduce
or bring up the volume continuously.
< Press the STANDBY/ON button to put the unit in t he stand by
mode when it is not being used.
< If you pres s th e STAN DBY/ON b utton to put the unit in the
standby mode w hen SOURCE is set for AUX1 or AUX2, first, the
speaker sound stops and then af ter about 2 seconds the o utput
to the sub woofer stops.
This chapter describes the basic operation w hich is available in every
mode.
When you use the unit for the first time, s et the clock and the setting
of the unit. (see previous page for “Setting the Clock”, page 37 fo r
“Settings”).
1 Press the STANDBY/ON button to turn the unit on.
< The unit turns on with the source that was last selec ted.
< You can also use the SOURCE but ton (or the TUNER, DISC, iPod/
USB or AUX button on the remote control unit) to turn the unit
on.
2 Press the SOURCE button to select a s ource.
Each time the SOURCE button is pressed, the source changes as
follows:
FM Radio
AM Radio
AUX1 Source
AUX2 Source
iPod
DISC Source
USB Source
The selected source is shown on the front panel’s display.
Basic Operation (1)