1 SpeedTouch™570 Installation
Step | Action |
5Position the SpeedTouch™570 over the two hooks and slide the box down into place so that it is attached to the Velcro:
Two variants Two ADSL variants of the SpeedTouch™570 Wireless ADSL Routers exist:
•The SpeedTouch™570 :
The ADSL/POTS variant connecting to an analog POTS(*) line
•The SpeedTouch™570 i :
The ADSL/ISDN variant connecting to a digital ISDN(**) line.
You can identify your variant by checking the identification label located on the bottom of your SpeedTouch™570 .
Use only the SpeedTouch™570 variant which is appropriate for the DSL service deliv- ered to your premises. Check with your Service Provider to determine whether your SpeedTouch™570 is adapted to ADSL service requirements.
(*) Plain Old Telephone Service (POTS)
(**) Integrated Services Digital Network (ISDN)
ADSL service The appropriate DSL service must be available your premises.
•ADSL service must be enabled on your telephone line
•As both telephone and ADSL service are simultaneously available from the same copper pair, you will need a central splitter or distributed filters for de coupling ADSL and telephone signals.
Always contact your Service Provider when installing splitter/filters!
Public telephone lines carry voltages that can cause electric shock. Only install splitter/ filters yourself if these are qualified for that purpose. Other splitter/filters may only be installed by qualified service personnel.
Connect the ADSL line The DSL port on the SpeedTouch™570 is marked “Line”.
Use the DSL cable provided to wire the SpeedTouch™570 DSL port to your telephone wall outlet.
3EC 17766 BAAA TCZZA Ed. 01 | 11 |
|
