Technicolor - Thomson 570i manual Variant is used for your DSL service, ADSL/POTS variant

3 Troubleshooting and Specifications

Problem	Solution
100Base-T LED of Ethernet port does	Make sure the computer's Ethernet port
not light up.	supports 100Base-T Ethernet connec-
	tivity and/or is configured for auto-negoti-
	ation.
Poor SpeedTouch™570 performance.	Make sure that the SpeedTouch™570 is
	installed and configured as instructed in
	this Setup and User's Guide and/or as
	instructed by the SP.
	Check whether a central splitter or dedi-
	cated filters are installed properly.
No Line synchronization achieved.	Make sure that ADSL service is enabled
Line Sync LED keeps flashing	on the wall outlet the SpeedTouch™570
	is connected to.
	Make sure the correct SpeedTouch™570
	variant is used for your DSL service.
	In case of ADSL/POTS services at your
	premises, ONLY use a SpeedTouch™570
	ADSL/POTS variant.
	In case of ADSL/ISDN services at your
	local premises, ONLY use a Speed-
	Touch™570 i ADSL/ISDN variant.

3EC 17766 BAAA TCZZA Ed. 01 45