TE-PLAQUINDUCTION-NC00127885_Q7_final 12/9/14 11:37 Page 22
MANUAL HEATmode
• Afterhavingturnedon the hotplatewiththe ON/OFFbutton, activate manual heat mode. The light above the button is
EN | switched on and a beep sounds confirmation. | |
• The defaultpower setting is level 3 and the LCD shows “P3”. | ||
|
•If you want to change setting, you have to press + or – button and the display shows the corresponding power setting. After each press, the hob sounds confirmation.
•Forinformation,you willfindbelowthe correspondingpower.
P 1 | P2 | P 3 | P4 | P5 | P6 | P7 | P8 | P9 |
450W 600W 850W 1000W 1300W 1500W 1700W 1900W 2100W
•You can use the timer function for this mode (see chapter “Timerfunction”).If youusethisfunction,thecookerwillstop automaticallyat the end of the programmedcookingtime.
•If you want to turn the cooker off you have to press the on/off button.
HEATMILK mode 
This mode allows you to heat milk in a saucepan of between
0.3litre and 1.5 litre to 85° C without boiling it in order to preserve its nutritional qualities. If you want to boil milk, it is preferableto select the manual mode.
•After having turned on the hotplate with the ON/OFF button, activateheat milk mode. The light above the button is switched on and a beep sounds confirmation.
•Selectthe H1, H2 or H3 leveldependingon the quantityof milkto heat up; the defaultlevelis H1.
•To adjust the setting, press on the + or - button; each time you press the button a beep will be emittedto confirmthe change.
H1 (small) | H2 (medium) | H3 (large) |
~ 0.3 litres – 0.5 litres | ~ 0.6 litres – 1 litre | ~ 1.1 litres – 1.5 litres |
•After3 secondsof inactivity,thefunctionis activatedanda “chaser” is graduallydisplayed,until the temperaturereachesabout 85° C.
"The chaser" :
•The LED on the LCD screen slowly displays a chaser until the temperaturereaches85° C.
22
