TE-PLAQUINDUCTION-NC00127885_Q7_final 12/9/14 11:37 Page 24
FRY mode
This mode allows you to fry food in a large quantity of oil, up to 2 l.
• After having turned on the plate with the ON/OFF button,
ENactivate fry mode. The light above the button is switched on and a beep sounds confirmation.
•The default fry temperature is 5 and the LCD screen will display« F5 ».
•If you want to change setting, you have to press + or - button, after each press the hob sounds confirmation.
•When the oil and pan temperature reaches the fry temperature setting, the hob beeps 2 times
•For information : you will find below the approximate temperatures for 2L of oil (Ingenio cookware)
F1 | F2 | F3 | F4 | F5 | F6 |
|
|
|
|
|
|
125°C | 140°C | 155°C | 170°C | 185°C | 200°C |
|
|
|
|
|
|
•You can use the timer function for this mode (see chapter “Timerfunction”).If youusethisfunction,thecookerwillstop automaticallyat the end of the programmedcookingtime.
•If you want to turn off the cooker you need to do so manually by pressing any button or on/off button.
BOIL mode 
This mode allowsyou to boil between0.4 litreand 2,5 litreof water in a saucepan.(Do not use this mode for milk, as it may burn).
If the quantityof wateris insufficient,the hotplatewill not be able to detect the boiling point and the boiling point may be reached beforethe end of the programme.
•When you press boil mode, the light above the button is switched on and a beep sounds confirmation. The LCD shows a "chaser".
•Select the B1, B2 or B3 level depending on the quantity of water to heat up; the default level is B1.
•To adjust the setting, press on the + or - button; each time you press the button a beep will be emitted to confirm the change.
B1 (small) 16cm pan | B2 (medium) 18cm pan | B3 (large) 20cm pan |
|
|
|
~ 0,4 litres – 0,9 litres | ~ 1 litre – 1,5 litres | ~ 2 litres – 2,5 litres |
|
|
|
24
