•Whenthe waterreaches100°C, the applianceemits3 beeps and stops heating.
•If you want to cancel boil mode, you can select another program or press the on/off button.
•The timer function is not available for this mode.
11:37 Page 25
EN
Timer function for all functions except boiling water and heating milk
•Aftersettingthe cookingparameters,pressthe timer button (L) and the LCD screen will display the default time setting (15 min). A beep soundsand the timersettingstartsblinking with a defaulttime of 15 min.
•Press +/- button to set the cooking time (
•For stew , after 60 min, the LCD shows « 1 H » and « 2 H » for 1 and 2 hours
•After 3 seconds without any action the Timer starts and LCD stops blinking.
•You can adjust the setting for the manual, fry and sauté cookingprogrammesby pressingthe +/- buttons.
•If you press a second time on the Timer button ,the LCD starts blinking again and you can change setting with
•Once the timer goes below one minute, the countdown will continue in seconds until the timer reaches 00, then the hotplatewill switchoff and emit 3 beeps.
•Toremove the Timer function, press the Timer button for 3 seconds.
Cleaning
You must disconnect the power lead, wait until the ceramic glass plate has cooled, then follow the instructions below to clean the appliance:
1.Ceramic glass plate: if the ceramic glass plate is very dirty, clean using a damp
2.Cooker body and control panel: Use a damp soft cloth to clean. In case of any oil stains that are not easily removed, wipe away the stains with a soft cloth rinsed in warm water and a little
3.Air entry/air exit surface: remove any dust with a cotton bud.
25
