TE_ASPIRATEUR AFU_903460-01_903460/01 01/07/14 1 1:35 Page3

•Repairs must only be carried out by specialists using original replacement parts.

•To attempt the repair of an electronic appliance at home may be hazardous to the user.

•Only use original, guaranteed Tefal replacement parts (filters, batteries...).

•This appliance is intended for domestic use only. In case it is used inappropriately, not following the given ins- tructions, Tefal will not be subject to any liabilities whatsoever.

•The vacuuming tube located at the height of the vacuum head must be checked regularly. If it is damaged, the appliance should not be used.

2. Electric power source

•Make sure that the voltage indicated on the rating plate of the charger corresponds to that of your power source.

•Never unplug the charger by pulling the electric cord.

•If the charger cord is damaged or if the charger itself does not function properly, do not use any other charger, different from the model provided by the manufacturer, and contact the Tefal Consummer Service or go to the authorized Service Center nearest to your home.

3. Repairs

Repairs must only be carried out by specialists using original replacement parts. To attempt the repair of an electronic appliance at home may be hazardous to the user, and will invalidate the guarantee.

DESCRIPTION

1.Ergonomic handle

2.Stop/Start button 2.a Stop position 2.b “Min”position 2.c “Max”position

3.Light“MAX”speed signal

4.Light charge signals

5.Neck

6.Main body

7.Locking screw

8.Air outlet grill

9.Dust tray

9.a Dust receiver

9.b Dust separator

9.c Foam rubber motor protection filter

9.d Lid

10.Connection tube

11.Delta vacuum head with integrated electro-brush

11.a Electro-brush

11.b LED*

11.c Latches

11.d Trap

12.Wheels

13.Charger

-12V: ref. RS-RH5155*

-12V / Korea : ref RS-RH5203*

-12V / H-K : ref RS-RH5380*

14.Batteries

-12V: ref. RS-RH5157*

15.Tool

BEFORE FIRST USE

1. How to assemble the Appliance

Unpack your appliance and throw away any tags attached. Make sure to keep your guarantee and read the instructions carefully before using the appliance for the first time.

•Remove the screw from the neck and leave the nut in its place.

•Fix the neck by carefully inserting it in the upper portion of the main body (fig.1).

•Insert the locking screw (7) into the neck and screw it tightly using the tool provided with the appliance (fig.2).

•Fix the Delta vacuum head (11) by locking it into place in the lower portion of the main body (fig.3).

•Fix the dust tray on the main body of the appliance (fig 19).

Please note : In order to detach the Delta vacuum head, press the ejection button located at the back of the main body (fig.4) and pull to remove.

3* May vary according to model