Brief Procedures
1–12 TDS 500C, TDS 600B & TDS 700C Performance Verification and Specifications
HPressing SET LEVEL TO 50% triggers the signal that you just left
untriggered. (Leave the signal triggered).
3. Verify that the delayed trigger system operates:
a. Select the delayed time base:
HPress HORIZONTAL MENU.
HPress the main-menu button Time Base.
HPress the side-menu button Delayed Triggerable; then press the
side-menu button Delayed Only.
HSet the horizontal SCALE for the D (delayed) time base to 200 s.
b. Select the delayed trigger level menu:
HPress SHIFT; then press DELAYED TRIG.
HPress the main-menu button Level; then press the side-menu button
Level.
c. Confirm that the following statements are true:
HThe trigger-level readout for the delayed trigger system changes as
you turn the general purpose knob.
HAs you rotate the general purpose knob, the square-wave probe-com-
pensation signal can become triggered and untriggered. (Leave the
signal untriggered, which is indicated by the display not updating).
HPressing the side-menu button Set to 50% triggers the probe-com-
pensation signal that you just left untriggered. (Leave the signal
triggered).
d. Verify the delayed trigger counter:
HPress the main-menu button Delay by Time.
HUse the keypad to enter a delay time of 1 second. Press 1, then press
ENTER.
HVerify that the trigger READY indicator on the front panel flashes
about once every second as the waveform is updated on-screen.
4. Remove the test hookup: Disconnect the probe from the channel input and
the probe-compensation terminals.