4 Operations
Note: The above screens use T to indicate two values: seconds and minutes. The first value is the time period between samples on the logger, and is programmable. The second time value is the width of the logger chart page, and is not programmable. There are 64 samples per logger chart page, and over 20 pages of past data which may be viewed.
Mode determines how to calculate the sample values shown on the logger chart:
Average: The average of all measurements in the time period between samples.
Median: The average of the minimum and the maximum values measured in the time period between samples.
Maximum: The maximum of all values measured in the time period between samples.
Minimum: The minimum of all values measured in the time period between samples.
Sample: The last sample measured in the time period between samples.
Press EDIT in step 6 and then use the UP and DOWN keys to select the above choices for the logger chart mode.
TELEDYNE ANALYTICAL INSTRUMENTS |
