Teledyne 465M instruction manual RS232 Configuration

6.For RS-232 operation, set SW2 to either DTE or DCE (See Section 8.3) For RS- 485 operation, set SW2 to DCE.

7.Re-install the instrument cover.

8.Re-connect power to the instrument.

9.The software portion of the COM port configuration will now automatically be completed after the next instrument boot-up.

SW3

1	2	3	4	5	6	7	8	9 10
									RS232 Configuration
ETHERNET
			RS485				RS232

Close Indicated Positions Only

SW3

1	2	3	4	5	6	7	8	9 10
									RS485 Configuration
ETHERNET
			RS485				RS232

Close Indicated Positions Only

SW3

1	2	3	4	5	6	7	8	9 10
									Ethernet Configuration
ETHERNET			RS485				RS232

Close Indicated Positions Only

Figure 8-1: Com Configuration Jumper Settings (SW2)

P/N 06160D DCN6409 Teledyne API Model 465M O3 Monitor Instruction Manual - Page 44