4.4.2.Exhaust Connection

Connect a ¼” OD vent line to the “Exhaust” fitting on the rear panel. This line must be vented outdoors or to an appropriate discharge system capable of handling ozone. Local regulations regarding the discharge of ozone to the atmosphere must be observed. Note that the monitor may be equipped with an internal ozone scrubber for removal of ozone from the exhaust stream. For safety reasons, the exhaust port must still be vented appropriately as described above.

CAUTION

Exhaust gas from the M465M may contain dangerous levels of ozone! Do not vent this gas into enclosed or occupied areas.

Figure 4-5: Rear Panel Electrical I/O Connections

P/N 06160D DCN6409 Teledyne API Model 465M O3 Monitor Instruction Manual - Page 21

Page 23
Image 23
Teledyne 465M instruction manual Exhaust Connection, Rear Panel Electrical I/O Connections