11. CALIBRATION

CAUTION

RISK OF ELECTRICAL SHOCK. THE OPERATIONS

OUTLINED IN THE FOLLOWING SECTIONS OF THIS

CHAPTER ARE TO BE PERFORMED BY QUALIFIED

MAINTENANCE PERSONNEL ONLY!

11.1.Factory Calibration

The M465M is calibrated to internal T-API calibration standards to shipment. A calibration certificate for your instrument can be purchased from Teledyne API if required. Teledyne API also recommends that the M465M be re-calibrated once a year. Teledyne API can provide NIST traceable calibration services at our factory or on-site. Please contact our Customer Service department for details on these services (see Section 12).

P/N 06160D DCN6409 Teledyne API Model 465M O3 Monitor Instruction Manual - Page 69

Page 71
Image 71
Teledyne 465M instruction manual Factory Calibration