| • | o Blinking red (5 seconds): USB device connection failure |
| Data Transfer | |
|
| o Blinking blue: Active data transfer |
|
| o Blinking red: USB device read/write error |
USB Port | • | USB 2.0 port for USB storage expansion. |
Power Button | • | Power on/off N299 |
Rear Panel
The rear panel of the N299 houses the USB and Ethernet connections, as well as the power connector. See the table below for descriptions of each:
Item | Description |
Power Connector | • Connect the included power cord to this connector |
WAN Port | • WAN port for connecting to an Ethernet network through a |
| switch or router |
LAN Port | • LAN port for connecting to an Ethernet network through a switch |
| or router |
USB Ports | • USB 2.0 ports for storage expansion |
|
|
NOTE
There are two USB ports at the back panel of N299, you can use either one, but not two at the same time.
11
