System Management
The System menu gives you a wealth of settings that you can use to configure your N299’s system administration functions. You can set up system notifications, view system logs, and even upgrade firmware from this menu.
System Notifications
From the System menu, choose the Notification item, and the Notification Configuration screen appears. This screen lets you have the N299 notify you in case of any system malfunction. Press Apply to confirm all settings. See following table for a detailed description of each item.
Notification Configuration
Item | Description |
Beep Notification | Enable or disable the system beeper that beeps when a problem |
| occurs. |
Email Notification | Enable or disable email notifications of system problems. |
SMTP Server | Specifies the hostname/IP address of the SMTP server. |
Port | Specifies the port to send outgoing notification emails. |
Auth Type | Select the SMTP Server account authentication type. |
Sender Address | Set the sender mail address. |
Sender Password | Enter the password for the sender’s mail account. |
Confirm Password | Confirm a new password. |
Receivers’ | Add one or more recipient’s email addresses to receive email |
Address | notifications. |
Send Test Mail | Click to send out a test |
| correct. |
NOTE
System Logs
Consult with your mail server administrator for email server information.
From the System menu, choose the Logs item and the System Logs screen appears. This screen shows a history of system usage and important events such as disk status, network information, and system booting. See the following table for a detailed description of each item:
37
