Creating a RAID
To create a RAID volume, follow the steps below:
1.On the RAID Configuration screen, set the RAID storage space as JBOD, RAID 0, or RAID 1 — see Appendix C: RAID Basics for a detailed description of each.
2.Tick the checkboxes of the hard disks you wish to use to create a RAID.
3.Specify a stripe size — 64K is the default setting.
4.Press Create to build the RAID storage volume.
NOTE
Building a RAID storage space may take time, depending on the size of hard drives and RAID mode.
WARNING | Creating RAID destroys all data in the current RAID. The data is unrecoverable. |
Deleting a RAID
To delete a RAID volume, follow the steps below:
1.On the RAID Configuration screen, click Remove.
2.The system automatically removes the RAID volume and you can create a new RAID.
WARNING | Removing RAID destroys all data in the current RAID. The data is unrecoverable. |
Folder Management
From the Storage menu, choose Folder, and the Folder screen appears. This screen allows you to create and configure folders on the N299 volume.
Folder
Item | Description |
Folder name | Displays the name of the folder. |
Description | Provides a description of the folder. |
NFS | Press NFS to setup access privilege. |
ACL | Press ACL (Access Control List) to configure which users have |
| access to this folder. |
Edit | Press Edit to enter the Edit screen and modify the folder’s |
| name and description. |
Del | Press Del to delete the folder. A screen appears asking to |
| confirm the deletion. |
Remove | Press Remove to delete folder. |
Add | Press Add to enter the Add Folder screen. |
| 26 |
