Thecus Technology N299 user manual Cable Connections, Installation Wizard

Cable Connections

Make the following connections on the Thecus N299 and then power up the unit:

1.Connect an Ethernet cable from your network to the WAN port on the back panel of the N299.

2.Connect the provided power cord into the universal power socket on the back panel. Plug the other end of the cord into a surge protected socket.

3.Press the power button on the front panel to power on the N299.

4.Make sure system is running properly by checking all front panel LEDs for any error indications.

Installation Wizard

The handy Thecus Setup Wizard makes configuring N299 a snap. To configure the

N299 using the Setup Wizard, perform the following steps:

1.Insert the installation CD into your CD-ROM drive (the host PC must be connected to the network).

2.The Setup Wizard should launch automatically. If not, please browse your CD-ROM drive and double click on Setup.exe.

NOTE

For MAC OS X users, double click on Thecus Setup Wizard 1.1.6.dmg

3. Complete the Setup Wizard a. Device Discovery

The Setup Wizard will start and automatically detect all Thecus Storage devices on your network.

13