Thermador DP30 manual To Set Self-Clean, Model Oven Control Knobs, At the End of the Clean Cycle

SECTION SIX: CARE AND MAINTENANCE

Self-Cleaning the Oven

To Set Self-Clean

1.Select CLEAN using the Selector switch.

2.Set Oven Control Knob to CLEAN.

▲Cooling Blower turns on.

▲PREHEATING, HEATING, and CLEANING lights and turn on..

▲The door closing process takes approximately 60 seconds to complete, at which time the door becomes locked.

Check to make certain the door is locked.

30" MODEL

OVEN CONTROL KNOBS

At the End of the Clean Cycle

The Clean cycle takes 2 hours to complete. The blower and the HEATING light and the CLEANING light turn off when the cycle is finished. Do not turn the selector switch or the oven control knob to the OFF position until the automatic lock cycles to the open position.

1.Select OFF using the Selector Switch.

▲The door latch will open automatically when the oven is below 500°F and the automatic Door Lock completes its 60 second cycle to the open position.

▲The cooling blower turns off when the oven temperature drops to 325°F.

2.Turn Oven Control Knob to OFF position.

CAUTION

The interior of the oven will still be at baking tempera- tures when the automatic lock cycles to its open posi- tion and the oven door can be opened.

Cleaning Hints

1.The porcelain enamel finish is acid resistant, but not acid proof. Acidic foods, such as citrus juices, tomatoes, rhubarb, vinegar, alcohol or milk, should be wiped up and not allowed to bake onto the porcelain during the next use.

2.Remove the oven racks. See Racks, on Range Cleaning Recommendations, Page 35.

3.The heating elements in the oven do not require cleaning; the elements burn themselves clean when the oven is in use. Both elements are permanently connected. It is not necessary to clean the broiler shield above the broil element.

30