4.2 Searching terrestrial broadcasting services 37
4.2Searching terrestrial broadcasting services
To perform service search, se- lect the Installation > Terrestrial Search menu.
If you have an active antenna, you should set the Antenna Supply 5V option to on to supply power to the amplifier of your antenna. The digital receiver will supply the antenna with 100 milliampere at maximum.
You should set the Search Mode option to Auto at the first ser- vice search after connecting the digital receiver. The digital re- ceiver will search all available services with automatic search mode. Transponder numbers range from 5 to 12 at VHF and 21 to 69 at UHF.
To search a certain transponder, set the Search Mode option to Manual, and select your desired transponder at the Channel option.
You can search pay services as well as free services. To search only free services. set the FTA/Scrambled option to FTA only. FTA means free service. To search only pay services, set it to CAS only. CAS means pay service. To search both free services and pay services, set it to FTA + CAS.
To start service search, select the Service Search command. Then appears a list box, in which found services will be listed. Press the OK button to save found services when a service search has been completed. To stop service search on the way
