Topfield TF 5400 PVR manual Restart the digital receiver

54 Listing Services

To transfer receiver data, perform the following steps:

1.Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the

digital receiver, and the other end into the matching port on the other digital re- ceiver.

2. Turn on both of them.

3. Select the Installation > Transfer Firmware > Transfer Data to Other IRD menu.

4. Restart the digital receiver.

NOTE

You had better memorize some important data such as video settings before starting transfer to avoid resetting them.