3.3 Local time setting 23

enjoy only one source or both of them in either stereo or mono. Set the Sound Mode option as you desire.

Apart from this setting, you can change the sound mode with button. See § 5.1.3 for detailed description.

3.2.6 RF output

If you have connected your television to the RF OUT socket, you should configure the radio frequency output. The digital receiver can make the analog television from the digital tele- vision and output it through the RF OUT socket.

Set the RF Output option to the television standard that your country supports referring to Table 3.1.

Table 3.1: Television standards by country

Signal type

Country

PAL G

Australia, Austria, Cyprus, Czech Republic, Egypt, Estonia, Finland, Ger-

 

many, Greece, Iceland, Iran, Israel, Italy, Kuwait, Latvia, Libya, Lithuania,

 

Luxembourg, Netherlands, New Zealand, Norway, Portugal, Slovakia, Slove-

 

nia, Spain, Sweden, Switzerland, Syria, Yugoslavia

PAL I

Hong Kong, Macao, Republic of Ireland, South Africa, United Kingdom

PAL K

Czech Republic, Hungary, Poland

NTSC M

Bahamas, Belgium, Bolivia, Chile, Ecuador, Fiji, Guam, Jamaica, Mexico,

 

Panama, Peru, United States, Venezuela

 

 

Set the RF Channel option to a channel number as you de- sire. You have to tune your television to the channel set to this option to watch television.

If you have connected your analog television antenna to the RF IN, you can watch analog broadcasts via the digital re- ceiver.

3.3Local time setting

You should set your local time for timer events. If you did not set the local time right, the program time table provided

Page 29
Image 29
Topfield TF 5400 PVR manual Local time setting, RF output