4.1Searching satellite broadcasting services 33
5. Finally select the Store command at the Motor Control
menuto save the tuned position when the receiving qual-
ityhas turned good.
Thereare more motor control commands for installers, but this
manual does not describe them. If you are an installer, refer
themto the manual for the STAB rotor.
4.1.3 ConfiguringUSALS settings
USALS (Universal Satellite Automatic Location System), also
known as DiSEqC 1.3, calculates the positions of all available
satellites from your location. Compared to DiSEqC 1.2, it is
no longer required to manually searchand store every satel-
lite position. Just by pointing to a known satellite position is
enough. This position will act as the central point. The USALS
willthen calculate positions of visible satellites.
Touse USALS, select the Instal-
lation >Satellite Setting >US-
ALSSetting menu.
At first you have to set the Mo-
torized DiSEqC 1.3 option to
Enable.
Tocalculate every satellite position, perform the following steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Inputyour location to the My Longitude and My Latitude
optionswith the
V−,
V+andnumeric buttons.
3. Input the position of your selected satellite to the Satel-