36 ServiceSearch
6. Specifythe PIDs of your desired service at the PID menu
withthe numeric buttons. PID(Packet Identifier) is a set
ofnumbers that identifies transport stream packets.
Tosearch every service of a SMATV transponder, if the digi-
tal receiver is connected to a SMATV,perform the following
steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Modeoption to SMATV.
3. Choose your desired transponder at the Frequency op-
tionor input it with the numeric buttons.
4. Inputthe symbol rate of your desired transponder to the
SymbolRate option with the numeric buttons.
5. Setthe Polarization option to the polarization of your de-
siredtransponder.
Youcan search pay services as well as free services. To search
only freeservices. set the FTA/Scrambled option to FTAonly.
FTAmeans free service. To search only pay services, set it to
CASonly. CASmeans pay service. Tosearchboth free services
andpay services, set it to FTA + CAS.
Tostart service search, select the Service Search command.
Thenappears a list box, in which found services will be listed.
Press the
OK button to save found services when a service
searchhas been completed. Tostop service search on the way
orexit without saving, press the
EXIT button.