3.5Adjusting on-screen display 27
3.5 Adjusting on-screen display
Youcan adjust the transparency level of on-screen display. Se-
lect the System Setting menu and set the OSD Transparency
optionas you desire. Itsavailable range is 0 to 50 percent.
Youcan adjust the display time of the information box. Refer
theinformation box to § 5.1.2. Toadjust its display time, select
the System Setting menu and set the Info Box Display Time
option as you desire. Its available range is 1 to 30 seconds. If
youset this option to No Info Box, the information box will not
displayed when you switch services. However, pressing the
buttondisplays the information box. Ifyou set this option
toNever Hide, the information box will always be displayed.
Youcan raise or lower the position of the information box. Se-
lect the System Setting menu, and then set the Info Box Posi-
tionoption as you desire. Itsavailable range is −10 to +3 line.
The morehigh the value is set, the more low the information
boxwill be positioned.
3.6 Touse the time shift feature
You can use the time shift featurewith this digital receiver.
Timeshift just means that the most recent hour of the televi-
sionservice you are watching is saved on the hard disk of the
digital receiver. Toenable this feature, select the System Set-
tingmenu and set the Time Shifting option to Enable. For de-
taileddescriptions about the time shift function, refer to § 5.4.
3.7 Setting for MediaHighway EPG
Almost every service provider would provideelectronic pro-
gram guide containing detailed program information. You
canget more abundant program information from a dedicated
transponder providing only electronic program guides than
general service providers. MediaHighway refers to the ded-