30 ServiceSearch
The other is Kuband which ranges approximately from12 to
18GHz.
LNB
The LNB (Low Noise Block converter)
is used to take a wide band of rel-
atively high frequencies, amplify and
convert them to similar signals carried
at a much lower frequency, which is
calledIF (Intermediate Frequency).
High frequencies from satellites are
convertedinto from 950 to 2150 MHz by
aLNB.
Selectthe Installation >Satellite
Setting >LNB Setting menu to
configurethe LNB settings.
Pressingthe
OK buttonon the Satellite Name option displays
thesatellite list in alphabetic order. Selectthe satellite toward
whichyour antenna sets its face.
The digital receiver has a database about broadcasting satel-
lites and their transponders, containing the following infor-
mation: satellite position, frequency range, symbol rate, po-
larizationand LNB frequency corresponding to the frequency
range. So you might not have to specify the LNB Frequency
option. However, if you have selected the Other entry at the
Satellite Name option to specify a satellite that is not in the