Toshiba 162D, 151D manual Off, Error only, Always Prints, Never Prints

Menu item			Settings (factory default setting appears in bold)	Page
6 : AUTO LISTING	Enable automatic printing of the Activity Report when
	information on a total of 50 fax transmissions/receptions
	accumulates.			88
	1	: ON
	2	: OFF
7 : PRINT SELECTION	1 : TRANSMISSION
		Select the condition for printing reports on fax transmissions.
		1	: ALWAYS PRINTS	89
		2	: ERROR ONLY
		3	: NEVER PRINTS
	2	: BROADCAST
		Select the condition for printing reports on broadcast
		transmissions.		89
		1	: ALWAYS PRINTS
		2	: ERROR ONLY
		3	: NEVER PRINTS
	3	: RECEPTION
		Select the condition for printing reports on received faxes.
		1	: ALWAYS PRINTS	89
		2	: ERROR ONLY
		3	: NEVER PRINTS
	4	: IMAGE MEM. PRINT
		Enable printing of the original image on transaction reports.
		1	: ALWAYS PRINTS	89
		2	: ERROR ONLY
		3	: NEVER PRINTS
8 : RECALL TIMES BUSY	Set the number of recall attempts that are made when the line is
	busy.			32
	00 - 14 (02)
9 : RECALL TIMES ERR	Set the number of recall attempts that are made when a
	communication error occurs.			33
	0	- 1 (1)
10 : RECALL INT. BUSY	Set the interval between recall attempts when the line is busy. 1
	to 15 minutes can be selected.			34
	01 - 15 min. (03 min.)
11 : RECALL INT. ERR	Set the interval between recall attempts when a communication
	error occurs. 0 to 15 minutes can be selected.			35
	00 - 15 min. (01 min.)
12 : SECURITY SELECT	Enable the polling security function.
	1	: ON		77
	2	: OFF
13 : FAX REMOTE	Set the 1-digit number used to activate remote fax reception.			40
NUMBER	0 - 9 (5)
14 : REMOTE RECEPTION	Enable the remote reception function.
	1	: ON		39
	2	: OFF
15 : FAX SIGNAL RCV	Enable automatic fax reception when a fax tone is heard after
	answering a call on an extension phone.			38
	1	: ON
	2	: OFF

7