10
SELECTING SETTINGS FOR THE FUNCTION
The general procedure for configuring settings for the fax function is explained below. Follow this procedure to
configure the settings explained on pages 6 through 9.
1Press the [MODE SELECT] key to

select fax mode.

The "FAX" indicator lights
up to indicate that fax
mode is selected.
2Press the [MENU] key.
"FAX MAIN MENU" will
appear in the display.
3Press the [ ] key ( ) or [ ] key ( )

to select a menu item and press the

[ENTER] key.

The item is selected.
Repeat this step until the
item that you wish to
configure appears.
4Select a setting or enter information.
To select a setting:
Press the [ ] key ( )
or [ ] key ( ) until the
setting is selected.
To enter information:
Press the numeric keys
to enter characters or
numbers.
5Press the [ENTER] key.
The setting or information
is entered.
6Press the [MENU] key.
Press the [MENU] key to
exit.
An item can also be selected after pressing the [MENU] key by pressing the numeric key for the item (the key
corresponding to the number that appears in front of the item). When the numeric key is pressed, the item is
selected or entered.
Note
R
• If you mistakenly select the wrong item,
press the [CLEAR] key ( ) and repeat
the procedure from step 2.
• To cancel a setting for a fax function,
press the [MENU] key.
Note