PERCEPTION 4000 | FEATURE OPERATION |
To Enter an Authorization Code from an Idle Station:
1.Take the station
2.Press the Authorization Code (AUTH) access key or enter the Authorization Code access code.
attendant console will indicate the number of the calling station. The number will remain displayed until the call is disconnected from the console.
AUTHORIZATION CODE ENTRY
You can access features that are normally restricted at a station, by entering a specific authorization code. All call allowances that are associated with the entered code will be allowed on the line used to place the call. This allows you to place certain types of calls from any station in the PERCEPTION 4000 system, regardless of the station’s individual restrictions. The call allowances will remain in effect for the duration of the call, after which the station’s original calling restrictions will be restored. Authorization codes can be entered from either an idle station or a station involved in a call.
Listen for dial tone.
Listen for recall dial tone. Display telephones will display “AUTH CODE.”
3.Enter the desired authorization code.
4.Dial the destination call number or enter the desired feature access code.
To Enter an Authorization Code from a Station Involved in a Call:
1.Press the CONF/TRNS key.
2.Press the AUTH key or enter the Authorization Code access code.
Listen for dial tone. If an invalid authorization code is entered, dial tone will sound, but the station’s original calling restrictions will not be altered.
The entered authorization code will be applied to the dialed number or feature.
Your current caller will be placed on “soft hold.” Listen for recall dial tone.
Listen for recall dial tone.
3.Enter the desired authorization code.
Listen for dial tone. If an invalid authorization code is entered, dial tone will sound, but the station’s original calling restrictions will not be altered.
