PERCEPTION 4000 | FEATURE OPERATION |
To Use a System or Group Speed Calling Number:
1.Press the Speed Calling
. . . or . . .
Enter the Speed
2.Enter the desired Speed Calling index number.
3.If the entered index number represents only part of the destination number, dial any remaining call digits.
Listen for recall dial tone.
If you attempt to access Group Speed Calling and your station does not belong to a Speed Calling group, you will hear reorder tone.
Each Speed Calling index number represents the placement of a certain number sequence in the System or Group Speed Calling number listing. Enter three digits (000 ~ 999) for System Speed Calling, or one digit (0 ~ 9) for Group Speed Calling.
The number sequence associated with the Speed Calling index number will be dialed.
Listen for ringback tone.
The entire number sequence will be dialed. Listen for ringback tone.
The call will proceed as a regular call.
NOTES:
1.You can place a current call on “soft hold” by pressing the CONF/TRNS key, and then place a call via Speed Calling. To return to the held call, press the Release (RLS) key.
2.A Speed Calling access code and index number can be assigned to an Autodial key.
3.While using Speed Calling, you will hear reorder tone if you enter an invalid Speed Calling access code or index number; if your station is restricted from accessing the call destination; or if your station is restricted from the route used for the call.
