Toshiba Digital Telephone manual Automatic Hold, To cancel ACB to busy or DND station

Features

Automatic Hold

4.Answer within three rings to prevent the callback from being cancelled.

5.If you were attempting to make an outside call and did not use LCR, you must now redial the telephone number.

After you answer, you hear a single tone, and the LED flashes green (in-use).

If you hear a busy tone after answering a callback, the called party is already on another call or the line has already been seized or has received an incoming call. Your request is not cancelled. You will be called again the next time a line becomes idle.

If the original call was made using LCR, the telephone number is automatically dialed.

➤To cancel ACB (to busy or DND station)

➤Press $XWR￿&DOOEDFN or [DN] + ￿￿￿.

Automatic Hold

Automatic Hold enables you to automatically place a call on hold by pressing another outside /LQH or a [DN] button—there is no need to press +ROG. You can also switch between calls without having to press +ROG. Your telephone must be programmed for this feature, otherwise existing calls drop if you do not press +ROG before answering or making another call.

➤To use Automatic Hold

➤While on a call, press another /LQH or [DN] to receive/originate a new call. The LED of the accessed line flashes (in-use). The first call is put on hold and the LED flashes (on- hold).

➤To switch between calls

➤Press /LQH or [DN] of the held call. The LED of the line just accessed flashes (in-use). The LED of the Line or [DN] placed on hold flashes (on-hold).

22 Strata DK Digital Telephone 5/99