Toshiba Digital Telephone Call Transfer with Camp-on, 105, To transfer call to a busy station

Add-on Module/DSS Console

Features

2.Announce the call.

3.Hang up.

4.If the station does not answer before a period set in system programming, the call recalls your station.

With Tone signaling, you would have to wait for the called station to answer before announcing the call.

The call rings the called station when you hang up. While the called station is ringing, the [DSS] LED is steady red, and the Line LED flashes green at the on-hold rate or if on a [DN] button, it goes idle.

When the called station answers the call, the [DSS] LED stays steady red, and the Line LED becomes steady red.

Call Transfer with Camp-on

You can transfer a call to a busy station from either a DSS console or an DADM. Use the [DSS] to transfer the call, even though the [DSS] LED associated with the station you are “transferring to” is red.

➤To transfer call to a busy station

1.	Press [DSS]	You may hear a busy tone. The original caller is placed
	corresponding to the	automatically on hold. The Line or [DN] LED flashes green at
	busy station to be	double the on-hold rate, and the [DSS] LED remains steady
	called.	red.
2.	Hang up.	The call rings the called station once with the camp-on tone.
		While the called station is receiving this tone, the Line LED
		flashes green (on-hold rate) or if you are on a [DN] button, it
		goes idle. The [DSS] LED remains steady red.
		When the called station answers the transferred call, the Line
		LED becomes steady red. The [DSS] LED remains steady red.
		Note If the busy station is in the DND mode, the call will not
		transfer, but will recall your telephone immediately.
		If the call is not answered after a specified Recall time set in
		system programming, camp-on is cancelled and the transferred
		call rings back.

Strata DK Digital Telephone 5/99 105