Toshiba Digital Telephone manual Remote Destination Change, To change the destination number

Features

Call Forward

Remote Destination Change

If Call Forward-External mode is set at your station, you can change the forwarding destination from a telephone outside of the system.

➤To change the destination number

1. Call into the DK		You hear ringback tone signal, then internal dial tone for 10
	system over a CO line	seconds.
	programmed for the	Try again if you hear busy tone.
	DISA feature.
		Note See the System Administrator for DISA telephone
		numbers.
2. After you receive dial		You hear a confirmation tone.
	tone, press ￿￿￿￿ then	If a number is not dialed, the system automatically makes the
	dial your [PDN].
		DISA CO line ring as a normal incoming call. Then, if the call
		is not answered within 15 seconds after the ringing starts, it
		disconnects.
3. Enter the Remote Call		You hear a confirmation tone. See the System Administrator
	Forward-External	for the security code which is assigned to your telephone in
	security code.	system programming.
4.	Enter the new
	destination number.
	You can enter an
	internal number,
	Voice Mail number
	or, a CO line access
	code plus an external
	telephone number.
	With some systems,
	you can dial a line
	group code instead of
	a CO line number
	access code. (See
	Appendix A—Table 1
	for access code
	information.)
5.	Press ￿.	You hear a confirmation tone.

30 Strata DK Digital Telephone 5/99