Toshiba E1-17063A manual Setup Flow

Models: E1-17063A

1 138
Download 138 pages 21.68 Kb
Page 54
Image 54

1. SETUP FLOW

The following table describes the Initial Setup Flow according to your conditions or needs.

To use the functions, the network configuration for this machine must be set up correctly. For the values of the network configuration, contact your network administrator.

TCP/IP Configuration Setup

Setup the TCP/IP on the machine to connect to your local area network and the Internet.

P3-4 TCP/IP CONFIGUTATION

E-mail Account Setup

Setup the E-mail account information on your machine to enable the E-mail transmission.

3

P3-10 E-MAIL ACCOUNT SETUP

 

E-mail Properties Setup

You can also configure the E-mail properties. After the machine is set up, it is recommended to configure the E-mail properties to use Internet Fax features.

P3-21 E-MAIL PROPERTIES SETUP

Scan to E-mail Setup

You can configure the default value of the E-mail properties that are used for the Scan to E-mail transmission.

P3-33 SCAN TO E-MAIL SETUP

Onramp Gateway Setup

In order to use the Onramp Gateway Transmission, the relay mailbox that E-mail addresses are assigned for the end stations should be created.

P3-35 ONRAMP GATEWAY SETUP

Offramp Gateway Setup

In order to use the Offramp Gateway Transmission, the device must be set up accordingly.

P3-40 OFFRAMP GATEWAY SETUP

Additional Functions Setup

The setup functions for the Network utilities (FTP) are available when the Internet Fax Kit is installed, though they are not used for Internet Fax setup.

P3-46 ADDITIONAL FUNCTIONS SETUP

3-3

Page 54
Image 54
Toshiba E1-17063A manual Setup Flow