5. SCAN TO E-MAIL SETUP

This section describes how to set the default values of the settings for Scan to E-mail function.

The default resolution and message size limit may be set for Scan to E-mail. These settings are for default values only, but may also be set or changed at the time that each E-mail document is sent.

Tip

Scan to E-mail can be used to send an Internet Fax to PCs which are located in your local area network. When you want to scan a document and send the image data to your PC, use this method. This method ignores the E-mail Properties settings of DSN and MDN so that this is useful when you do not require the disposition or notification of E-mail transmission status.

Resolution Setting

This sets the default resolution used for the Scan to E-mail mode.

3

1 Press the key and press .

SCAN SETUP

01.SCAN RESOLUTION 02.MESSAGE SIZE LIMIT

2 Press to select “01.SCAN RESOLUTION”.

SCAN RESOLUTION

1.200 x 100

2.200 x 200

3.200 x 400

4.400 x 400

3 Use the or key to select desired

resolution mode and press the key.

• The display returns to the SCAN SETUP menu.

SCAN SETUP

01.SCAN RESOLUTION 02.MESSAGE SIZE LIMIT

3-33

Page 84
Image 84
Toshiba E1-17063A manual Scan to E-MAIL Setup, Resolution Setting, Press to select 01.SCAN Resolution