Toshiba E6581830 instruction manual Communication parameters for CCL003Z, C101

E658130

5.2.Communication parameters for CCL003Z

Title	Function	Description
c100	Communication error detection	0.0 - 100.0 sec.
	delay time
c101		0: Stop and controlled by cmod, fmod
		1: Operation continue
	Inverter operation at the	2: Deceleration stop
	communication loss action	3: Coast stop
		4: Network error stop (err8 trip)
		5: Preset speed operation (by c102 setting)
c102	Preset speed	0: None
	operation selection	1 to 15: Preset speed
c103	Communication time-out	0: Disconnection detection
		1: When communication mode enable (Both cmod and
	condition selection	fmod are set CANopen or communication option) only
		2: 1 + Driving operation
c120*	CC-Link station number	1 to 64
	selection	Set the number of stations of inverters (Remote device
		station).
c121*	CC-Link baud rate selection	0: 156kbps
		1: 625kbps
		2: 2.5Mbps
		3: 5Mbps
		4: 10Mbps
		Set the baud rate for CC-LINK network
c122*	CC-Link extended selection	0: Occupies one station (V1.10)
		1: Occupies one station double (V2.0)
		2: Occupies one station quadruple (V2.0)
		3: Occupies one station octuple (V2.0)
		The function of remote registers can be enhanced.

* Set parameters according to the CC-Link network system.

- 13 -