E658130
5.5.10.Description of reply code
When executing the frequency setting (RYnD) or instruction code execution (RYnF), check the reply code (RWr (n+2), (n+10), (n+14), (n+16), (n+18)) in the remote register after execution.
Reply code
Data | Item | Description | |
(Hexadecimal No.) | |||
|
| ||
0000H | Normal (No error) | Normal completion of instruction code | |
execution. | |||
|
| ||
0001H | Write mode error | Parameter write was attempted during operation | |
other than a stop. | |||
|
| ||
0002H | Parameter selection | Unregistered code number was set. | |
error | |||
|
| ||
0003H | Setting range error | Set data is outside the setting data range. |
- 32 -
