40
Notes:
1. Alternatively, you can press the “V.FORMAT” button on the remote control to change the output format as
described on page 51.
2. You can also press “A.RATIO” button on the remote control to change the aspect ratio as described on
page 51
3. “AUTO - 1080i” means that the recorder is in auto-switching mode and the curr ent video format as sent by
the broadcaster is 1080i. Likewise for “AUTO - 720p”, “AUTO - 576p” and “AUTO – 576i”
4. If, for purposes other than personal viewing, you display a program in a different aspect ratio from its
original setting, you may infringe on the copyrights that the program ma y be under.
AUDIO SETUP
1.
Highlight “AUDIO SETUP” and press the “ENTER”
button.
2.
Use the “
Ÿ
” and “
ź
” buttons to select between
“AUDIO FORMAT” and “DIGITAL OUTPUT”.
3.
Press the “ENTER” button to confirm your choice.
DIGITAL OUTPUT
If the broadcasted program contains more than one
type of digital audio output, use the “
Ż
” and “
Ź
”
buttons to switch between the available options “PCM”
and “Dolby Digital”.
Note: You need to connect the recorder to an amplifier
with Dolby® Digital decoding capability via
“DIGITAL AUDIO” optical port or coaxial port
when “Dolby Digital” option is selected (Refer to
page 22 for the connection details). Otherwise,
you may encounter softer audio from TV.
AUDIO FORMAT
Use the “
Ÿ
” and “
ź
” buttons to select the preferred
audio format present in the program you are watching.
Note: Alternately, you can pop up the AUDIO
SELECTION window by pressing the AUDIO
button on the remote control. Refer to AUDIO
on page 53.
PASSWORD
1.
Highlight “PASSWORD” and press the “ENTER”
button. When prompted, enter your current
password by pressing the numeric buttons on the
remote control.
2.
You will then be prompted to enter the New
Password.
3.
Enter the new password again to reconfirm.
Notes:
1. The default password is 0000.
2. If you forget your password, consult your local
dealer to perform a manual reset of your
recorder.