5. Press any of the numeric buttons to skip forward a certain percentage of the program according to the number pressed. (i.e. ‘1’ – 10%, ‘9’ – 90%)
6. Press “TIMESLIP” button again to exit this mode. The recorder stops storing the broadcast on the HDD. A message appears and asks whether you will save the stored data or erase it. Press the “” and “” buttons to select, then press the “ENTER” button.
Notes:
1.Pause TV recording stops when the HDD is filled up. It will not begin if the HDD is full.
2.Fast forwarding can be done up to 10 seconds prior to the current broadcast.
Chase Play
1. This function allows you to begin playback from the beginning of a program currently being recorded without having to wait for the end of the recording. Playback can also proceed at a faster rate to catch up with the actual program in progress.
2. While recording a TV program on the HDD, press “TIMESLIP”. The recorder displays a TV program as it is being recorded.
3. Press the “REVERSE SKIP” button to go to the beginning of the recorded program and playback starts automatically.
4. Press “TIME BAR” to determine location from current broadcast.
5. During playback, operations like Fast Forward/Reverse, Slow Forward/Reverse and Frame Forward/Reverse can be performed to locate a specific scene. In particular, Fast Forward can be used to catch up with the actual program in progress. Refer to page 65 for more information on those operations.
6. Press “TIMESLIP” again to exit this mode and the current broadcast returns.
64
Notes:
1.Chase Play/Recording stops when the HDD is filled up. Playback can be up to the location where the recorder stopped the recording. The Chase Play/Recording cannot begin if the HDD is full.
2.The playback picture may appear after a delay of several seconds. The playback location will never be identical to the record location in the program. It will always trail the record location by a few seconds.
3.Fast forwarding can be done up to 10 seconds prior to the current broadcast.
