Toshiba HFC R-410A manual Indoor units Ceiling-suspendedunits

Indoor units

Ceiling-suspended units

Model MMC-AP		0151H	0181H	0241H	0271H	0361H	0481H
Cooling capacity*	kW	4.5	5.6	7.1	8.0	11.2	14.0
Heating capacity	kW	5.0	6.3	8.0	9.0	12.5	16.0
Electrical data
Power supply	V-ph-Hz	230-1-50 (voltage range 220-240 V) - power supply to indoor unit only
Operating current	A	0.29	0.32	0.42	0.42	0.78	0.84
Power input	kW	0.033	0.038	0.050	0.050	0.091	0.110
Starting current	A	0.43	0.48	0.62	0.62	1.17	1.25
Unit appearance		White (Munsell 10Y 9.3/0.4)
Unit dimensions
Height	mm	210	210	210	210	210	210
Width	mm	910	910	1180	1180	1595	1595
Depth	mm	680	680	680	680	680	680
Unit weight	kg	22	22	26	26	34	34
Heat exchanger		Finned tube
Sound proofing/heat insulating material		Non-flammable insulation
Fan type		Centrifugal fan
Fan motor power input	W	30	30	40	40	80	80
Air flow
High	l/s	200	217	308	308	458	500
Medium	l/s	167	183	250	250	383	433
Low	l/s	150	150	233	233	333	367
Air flow
High	m3/h	720	780	1110	1110	1650	1800
Medium	m3/h	600	660	900	900	1380	1560
Low	m3/h	540	540	840	840	1200	1320
Sound power level (high/medium/low)	dB(A)	48/45/43	49/46/43	51/49/46	51/49/46	54/51/48	56/53/50
Sound pressure level (high/medium/low)**	dB(A)	35/32/30	36/33/30	38/36/33	38/36/33	41/38/35	43/40/37
Air filter		Standard long-life filter supplied
Controller		Remote controller
Room thermostat		Supplied
Connection pipes
Gas connection diameter	in	1/2	1/2	5/8	5/8	5/8	5/8
Liquid connection diameter	in	1/4	1/4	3/8	3/8	3/8	3/8
Drain connection, nom. dia (polyvinyl tube)	in	3/4	3/4	3/4	3/4	3/4	3/4

Rated conditions: Cooling: Indoor air temperature 27°C db/19°C wb, outdoor air temperature 35°C db

Heating: Indoor air temperature 20°C db, outdoor air temperature 7°C db/6°C wb

*Cooling capacities and electrical data are measured at the conditions specified by JIS B 8615, based on the reference piping which consists of 5 m of main piping and 2.5 m of branch piping connected with 0 metre height.

**The sound pressure level is measured in an anechoic chamber in accordance with JIS B 8616. Normally the values measured in the actual operating environment become larger than the indicated values due to the effects of external sound.

52