Toshiba HFC R-410A manual Indoor units Floor-mountedconsole units

Indoor units

Floor-mounted console units

Model MML-AP		0071H	0091H	0121H	0151H	0181H	0241H
Cooling capacity*	kW	2.2	2.8	3.6	4.5	5.6	7.1
Heating capacity	kW	2.5	3.2	4.0	5.0	6.3	8.0
Electrical data
Power supply	V-ph-Hz	230-1-50 (voltage range 220-240 V) - power supply to indoor unit only
Operating current	A	0.26	0.26	0.43	0.43	0.47	0.47
Power input	kW	0.056	0.056	0.092	0.092	0.102	0.102
Power factor	%	94	94	93	93	94	94
Starting current	A	0.60	0.60	0.80	0.80	1.10	1.10
Unit appearance		Silky shade (Munsell 1Y 8.5/0.5)
Unit dimensions
Height	mm	630	630	630	630	630	630
Width	mm	950	950	950	950	950	950
Depth	mm	230	230	230	230	230	230
Unit weight	kg	37	37	37	37	40	40
Heat exchanger		Finned tube
Sound proofing/heat insulating material		Non-flammable insulation
Fan type		Centrifugal fan
Fan motor power input	W	45	45	45	45	70	70
Air flow
High	l/s	133	133	250	250	300	300
Medium	l/s	117	117	217	217	258	258
Low	l/s	100	100	181	181	217	217
Air flow
High	m3/h	480	480	900	900	1080	1080
Medium	m3/h	420	420	780	780	930	930
Low	m3/h	360	360	650	650	780	780
Sound power level (high/medium/low)	dB(A)	52/50/48	52/50/48	58/54/51	58/54/51	62/57/52	62/57/52
Sound pressure level (high/medium/low)**	dB(A)	39/37/35	39/37/35	45/41/38	45/41/38	49/44/39	49/44/39
Air filter		Standard single filter supplied
Controller		Remote controller
Connection pipes
Gas connection diameter	in	3/8	3/8	3/8	1/2	1/2	5/8
Liquid connection diameter	in	1/4	1/4	1/4	1/4	1/4	3/8
Drain connection, nom. dia (polyvinyl tube)	in	3/4	3/4	3/4	3/4	3/4	3/4

Rated conditions: Cooling: Indoor air temperature 27°C db/19°C wb, outdoor air temperature 35°C db

Heating: Indoor air temperature 20°C db, outdoor air temperature 7°C db/6°C wb

*Cooling capacities and electrical data are measured at the conditions specified by JIS B 8615, based on the reference piping which consists of 5 m of main piping and 2.5 m of branch piping connected with 0 metre height.

**The sound pressure level is measured in an anechoic chamber in accordance with JIS B 8616. Normally the values measured in the actual operating environment become larger than the indicated values due to the effects of external sound.

55