Installation
Step 12: Program the Mailboxes
Busy Station Identification
To use this feature you must configure the console_slot_id and dss_active parameters, program the DSS Port field (see Step 12: “Program the Mailboxes” on page 27), and install/program a PDKU as the DSS console (see “Busy Station Identification” on page 7).
➤To configure the feature in Stratagy
1.Set the dss_active parameter to TRUE.
2.Configure the DSS Port field on the User Menu – Options screen for each mailbox.
Important! Once the DSS/Busy Lamp feature has been programmed using the two parameters and the DSS Port field, Stratagy IVP8 must be restarted two times. The first restart configures the DSS parameters/field. The second restart “loads” the DSS parameters/field into active memory.
Stratagy IVP8 System Time
Using the ksu_time parameter, you can synchronize Stratagy IVP8’s system clock with the system clock of the supporting Strata CTX/Strata DK telephone system. Setting this parameter to true, disables the daylight_saving_time parameter.
Note An LCD telephone must always be physically installed on the first port of the PDKU card in the Strata DK (defined in console_slot_id parameter). During installation, the
Stratagy IVP8’s system time must be reset prior to syching with the Strata CTX/Strata DK. See “ksu_time” on page 26 for details.
This feature requires SMDI integration to work with the Strata CTX.
Step 12: Program the Mailboxes
➤Program the User mailboxes for the customer’s application. See “Software” on page 3 for Stratagy IVP8 special features on the Main Menu and Users Menu, Options screen. See Chapter 6 – Users Menu, Chapter 7 – Auto (Scheduling) Menu and Chapter 8 – Notify Menu in the Stratagy R3 I&M Manual for complete details on using the screens.
Step 13: Program the Applications
Note See Chapter 9 – Token Programming in the Stratagy R3 I&M Manual for complete details on all the Stratagy tokens.
Exclusive Stratagy IVP8/Stratagy DK Tokens
Tokens available exclusively for the Stratagy IVP8/Stratagy DK are:
•KM – Enables a Stratagy Admin PC’s modem to communicate with the Stratagy IVP8 internal modem (2400 baud). This token is factory programmed in User ID 993.
Example: @KM
•KT( ) – Directs calls to a designated User ID when DSS function is active (dss_active = true), the DSS port is assigned in the “answering” mailbox, and the Night Transfer on the DSS console is On.
Syntax: KT(XXX)G(YYY)
where:
XXXBox number used when Night Transfer is On.
YYYBox number used when Night Transfer is Off.
Stratagy IVP8 Installation Guide 01/02 | 27 |
