4
5
6
'R\RXZDQWWRDFWLYDWHWKH'66%XV\/DPSIHDWXUH"
PDKU/BDKU cards must be installed and programmed for a DSS Console.
❐Install and program the PDKU/BDKU in the Strata CTX.
❐Refer to the Strata CTX Programming Manual for DSS programming.
❐Set the dss_active parameter to TRUE.
❐Configure the DSS Port field on the User Menu – Options screen for each mailbox.
$UH\RXJRLQJWRKDYH60',"
SMDI is required for the Call Record feature with Stratagy Release 3.3/IVP8. A BSIS card must be located close to the Stratagy.
❐Install and program serial card BSIS in the Strata CTX. Refer to the Strata CTX Programming Manual.
❐A serial cable must be installed between the BSIS card and the Stratagy. Toshiba’s
❐Stratagy’s serial Port 1 is reserved for SMDI communication.
:DQWWRV\QFK6WUDWDJ\V\VWHPWLPHZLWK6WUDWD&7;"
SMDI is required if the Stratagy is going to be synched with the Strata CTX system time. Night Transfer Alternate Routing and Busy Station Identification do not require SMDI.
❐For clock synch, you must configure the ksu_time parameter and connect SMDI.
❐For Night Transfer Alternate Routing and Busy Station Identification, you must configure the console_slot_ID and DSS_active parameters.
7 $OOVHW"-XVWDIHZPRUHWKLQJV
❐Be sure to change the default password of the Shutdown Mailbox User ID 983 (see page 40 in the Stratagy IVP8 or Stratagy DK Installation Guide).
❐Don’t forget to wear the
❐When using an internal modem in the Stratagy Admin PC, remember that Stratagy Admin does not work with COM 3 or 4. Do not write over the Stratagy Admin subdirectory on your remote PC when installing the newer version of Stratagy Admin. Always retain previous versions of Admin.
❐Make sure your Strata I&M/Programming Manuals and Stratagy I&M Manuals are handy. Be sure to read the entire Stratagy IVP8 or Stratagy DK Installation Guide before installing.
❐Remember to back up your database after installation.
If you have read and completed this checklist, installation will be a breeze!
OK, let’s get started!
4011045
