Toshiba IVP8 manual Shutdown Using the Stratagy Admin’s Main Menu

Maintenance

Shut Down Stratagy IVP8

3.Enter the new security code (the default is ￿￿￿￿￿￿) and press ￿. All inactive channels are taken off-hook. All active channels are given a 60 second time delay to complete processing the current activity. After 60 seconds, they are disconnected and the system shuts down.

Note The Stratagy IVP8 is completely shut down when the status light is Out and all port LEDs are On.

Important! For security reasons, you should change the default security code.

Shutdown Using the Stratagy Admin’s Main Menu

1.From Stratagy Admin’s Main Menu, select Shutdown by pressing Alt+s. Stratagy IVP8 asks for the password.

2.Enter the password (the default is Stratagy) and press Enter. The screen enables you to select one of the following options:

•Shutdown and Restart CURRENT Version — Restarts Stratagy IVP8 (equivalent to pressing the Esc key on the current Stratagy IVP8 platform).

•Shutdown and Trace CURRENT Version — Shuts down, then restarts Stratagy IVP8 in the TRACE mode (TRACE.OUT file is created) on Stratagy IVP8’s flash drive. See “Trace” on page 42 for details.

•Shutdown and Start NEW Version — Shuts down, then restarts Stratagy IVP8 using the new database and new Stratagy IVP8 system software, if any.

•Shutdown and Start OLD Version — Shuts down, then restarts Stratagy IVP8 using the software version previous to the upgraded software.

•Shutdown, SCANDISK, and Restart — Shuts down, runs ScanDisk program and then restarts Stratagy IVP8.

Note There is no screen interaction during the running of the ScanDisk Utility.

•Shutdown and STOP for power off — Takes Stratagy IVP8 off-line and does not restart it.

Notes

•The Stratagy IVP8 is completely shut down when the status light is Out and all port LEDs are On.

•This option is not available when accessing Stratagy IVP8 remotely.

•This is the only option on the Shutdown menu that parks the head.

3.From the Shutdown Menu, highlight your selection and press Enter.

4.If you chose the “Shutdown and STOP for power off” option, Stratagy IVP8 asks you to confirm the shutdown. Type Y to confirm. The DOS prompt (C:\ADMIN3) displays.

➤To restart/reset the Stratagy IVP8 system after selecting “Shutdown and STOP for power off” option

Note If you select any of the first five options on the Shutdown Menu, Stratagy IVP8 automatically restarts.

1.Holding the Stratagy IVP8 by the edges or the strap, gently pull the card part way out of the slot. The card needs only to be pulled out so that the connectors do not meet.

2.Wait a few seconds and then gently push the card back into place. Apply firm, even pressure to ensure proper mating of the connectors. This automatically restarts the system and puts all channels on-hook and ready to accept calls.

Stratagy IVP8 Installation Guide 01/02 41