Toshiba P770 Battery lock, Slide the battery lock to release the battery pack, ready for removal

Satellite P770/P775/P770D/P775D

Figure 2-5 The underside of the computer

1 2

4

3

1.	Battery lock	3.	Memory module slot
2.	Battery release latch	4.	Cooling vents
Battery lock		Slide the battery lock to release the battery pack
		ready for removal.

Battery release latch Slide and hold this latch into its "Unlock" position in order to release the battery pack for removal. For more detailed information on removing the battery pack please refer to Chapter 5, Power and Power-Up Modes.

Memory module slot The memory module slot allows for the

	installation, replacement and removal of
	additional memory module.
	1 GB, 2 GB or 4 GB memory modules can be
	installed in the computer's two memory slots for a
	maximum of 8 GB system memory. The actual
	amount of useable system memory will be less
	than the installed memory modules.
	Refer to the Additional memory module section in
	Chapter 3, Operating Basics.
Cooling vents	The cooling vents help the processor to avoid
	overheating.

Do not block the cooling vents. Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.

Carefully clean the dust on the cooling vents’ surface using a soft cloth.

User's Manual 2-7