Toshiba P770 user manual Setup 3D Vision, Test your hardware setup

Satellite P770/P775/P770D/P775D

Carefully read the "Health and Safety Information" that is shown during 3D Vision setup and take the "Vision Test" in the setup wizard before you or your child use 3D Vision™. If you see excessive flicker in your peripheral vision, change the refresh rate of your display.

Detail usage of the 3D Vision, please refer to "3D Vision™ QUICK START GUIDE" in 3D Vision set.

3D Vision can work with internal LCD or external 3D devices connected via an HDMI output only. When you connect external display that doesn't support 3D, please disable 3D Vision.

Setup 3D Vision

Before starting 3D Vision Setup, Network settings should be done to see some information at Web site.

Follow the steps as detailed below to setup 3D Vision and don’t execute other operation while running 3D Vision Setup.

1.Launch the 3D Vision Setup by clicking Start -> All Programs -> NVIDIA Corporation -> 3D Vision -> Enable 3D Vision. The Setup Wizard takes you through setting up your display, and configuring the glasses.

2.Select Next to begin the Setup Wizard. The Wizard is very intuitive and easy to follow.

3.Turn on your glasses.

4.Test your hardware setup.

This screen is used to verify that your hardware is properly configured to view stereoscopic 3D effects and that your glasses and emitter are functioning properly. Follow the directions on the screen.

5.Do you notice flicker in your peripheral vision when looking through the glasses lens?

If you are seeing excessive flicker in your peripheral vision, this screen allows you to change the refresh rate of your display. When you select Yes, the refresh rate option is displayed. So please select suitable refresh rate on your environment. When you select No, 120Hz is selected.

User's Manual 3-6